A：It is difficult to say because it depends upon a bag size, quantity of RP agent and storage condition. Generally speaking, It is 6 to 12 month for RP system with PTS bag then humidity will be risen up, moisture absorption will be saturated. In case of Al bag, MGC recommends change the bag and replace the RP Agent every five years. This is just information but it maintains oxygen and moisuter free condition for 2 years at 60°C/95%RH.
Please inquire for more information.
A：It is 60°C. This is dependent on the polyethylene used for the packing material. They can withstand 100°C for a short period (approximately 2 weeks) within a PCT (pressure cooker test).
A： It is not applicable for these purposes. RP reagent is designed to absorb oxygen from the air (21% ) to 0.1% or less within one day. It requires a very high reactivity than the RP reagent.
A：RP reagent and barrier bags are not manufactured in a particle control environment. For products that are dust sensitive, they should be pre-packed in a dust-free polyethylene bag then ober-pack by the gas barrier bag.The RP reagent put between the barrier bags (can be used with HDD parts, semiconductor wafers/chips).
A：The levels of four types of heavy metals and total bromide levels are below the detectable limit. Analysis data is available. Please inquire to your distributor.